D-Link DIR-655 User Manual

Page 78

Section 6 - Troubleshooting

• Configure your Internet settings:

• Go to

Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab,

click the button to restore the settings to their defaults.

• Click the

Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings

button. Make sure nothing is checked. Click

OK.

• Go to the

Advanced tab and click the button to restore these settings to their defaults. Click OK three

times.

• Close your web browser (if open) and open it.

• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address

bar. This should open the login page for your the web management.

• If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait

about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different
computer.

2. What can I do if I forgot my password?

If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back
to the factory defaults.

To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a
paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process.
Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is
admin and leave the password box empty.