Specifications – Dixon 21 KAW/968999576 User Manual
Page 17
SPECIFICATIONS
17
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Additional information may be provided elsewhere in this manual.
KODIAK
®
CHASSIS:
11 GA - rectangular tube
SEAT:
Designed for operator comfort by use of high-density
closed cell foam padded back and arm rests, upholstered
with Cordura
TM
water-repellent fabric. Seat is adjustable
fore and aft. Mounted on operator suspension system.
MOWER DECK:
Made of 11 GA fabricated welded construction with external
reinforcement ribs. Three blades combine for a 52” or 60”
cut width. Cut height approximately 1.5” to 5” via 12
position lift handle.
BLADE DRIVE:
Electric clutch
DRIVE SYSTEM:
Each rear wheel is independently driven by a Parker 10cc
pump and TJ0230 wheel motor.
ENGINE:
Each mower is powered with either a 21HP Kawasaki,
20 HP Honda, 20 HP or 25 HP Kohler, 26 HP Briggs &
Stratton ELS twin cylinder engine, overhead valve, air
cooled, gasoline, full pressure lubrication with oil filter.
STARTING SYSTEM: Electric by key switch operation with safety interlocks on
parking brake and blade drive clutch.
TIRES:
Front 13 x 5 x 6 smooth tread (15 lbs)
Rear 23 X 9.5 - 12 (15 lbs)(52” decks) or
23 X 10.5 - 12 (15 lbs)(60” decks)
CAPACITIES:
Fuel - 11 gallon (approximately)
Hydrostat Oil tank - 4 quart with in-line 25 micron filter
Engine - 2 qts. SAE 10W30 (with filter)
DIMENSIONS:
Width
48” outside rear wheel measurement (52”
decks)
52” outside rear wheel measurement (60”
decks)
(approximate)
Height
70.5” ROPS up, 57” ROPS down
Length
79” (52” decks), 81” (60” decks)
Weight
960 lbs. (52” decks)
990 lbs. (60” decks)