Synaps THD-2850 - Manual (Page 18)

18
THD-2850/2860/2880
Main Features
CPU frequency: 400MHz
Flash Memory 1PC 32Mbit/4MByte
SDRAM Memory 1PC 64X16Mbit/128Mbyte DDR2-800
Tuner
Tuner Type Onboard Tuner IT9133
Frequency Range 177.5 ~ 227.5MHz; 474 ~ 858MHz
Input Impedance 75 Ω
Active Ant Power 5VDC @ 50mA MAX, Overload Protection
Input Level Range 64QAM:-78.5dBm ~ -8.75dBm;
16QAM:-84.1dBm ~ -8.75dBm;
QPSK:-90.3dBm ~ -8.75dBm
ANT Loop-Through 51MHz ~ 858MHz full Band loop through
Video Decoding
Video Decoding MPEG2 ISO/IEC 13818-2 MP@ML, H.264(MPEG4 part 10)
main and high profile level 4.1/MPEG-2 MP@HL
Aspect Ratio 4:3, 16:9
Video Resolution 1920x1080, 1280x720, 720x480
Demultiplexer MPEG2 ISO/IEC 13818-1
Input Bit Rate Max 100Mbit/s
Audio Decoding
Audio Decoding MPEG-1 layerI/II, PCM downmix, IEC958 SPDIF,
Dolby 5.1 channel, Dolby downmix 2 channel, Dolby Prologic2
Sound Mode LEFT/RIGHT/STEREO/MONO
Sampling Frequency 32KHz, 44.1KHz, 48KHz
AV Output
Video Bandwidth SD:5.0MHz(-3dB),HD:30MHz(-3dB)
Video Impedance 75 Ω
Video Voltage Level 1.0 Vp-p
Audio Freq. Range 20 ~ 20KHz
Audio Impedance 600 Ω
Audio Voltage Level 2V rms(5.6Vp-p)
Environment
Input Voltage AC 175 ~ 250V, 50Hz/60Hz
Consumption Max 8W
Temperature 0 ~ 40°C
Humidity <95%
6. SPECIFICATIONS
Specifications subject to change without notice.
For any printing errors in manual the manufacturer assumes no responsibility.
Please note that new software may change some of the features of the receiver.
The manufacturer keep that changes without notice.