Synaps THD-2800 - Manual (Page 18)

18
Specification
Tuner
Input Connector IEC 16902. Female
Input Frequency
Range VHF&UHF
Input impedance 75 ohm
RF output Connector (bypass)IEC 169-2 Male
Loop through 47-862 MHz
Demodulation
Standard ETSI EN300 744
Guard interval Modes 1/32,1/16,1/8 Active Symbol duration
FEC Modes Rate 1/2,2/3,3/4,5/6,7/8
Carriers/Constellation All modes supported including non hierarchical
Demodulation COFDM(QPSK/QAM16/QAM64) 2K and 8K
Network MFN/SFN
Channel bandwidth 7 and 8 MHz wide channel 21-68PLL
Video Decoder
Standard ISO/IEC 13818-2 and ISO/IEC 14496-10
Transport stream ISO/IEC 13818-1
Video decoding MPEG-2 SD/HD ( MP@ML and MP@HL ), MPEG-4 H.264/AVC
SD/HD
DivX 3.X ~ 6.X
JPEG,BMP,PNG, Motion JPEG
AVI, VOB, MOV, MKV
Aspect ratio 4:3, 16:9
Audio Decoder
Standard ISO/IEC13818-3 TR1011154
Audio decoding MPEG-1 and MPEG-2 Layer I & II, Dolby Digital Audio, E-AC3,WMA
and HE-AAC Digital Audio
Dolby Digital (AC-3) Stereo down-mixing to analog and digital audio outputs (including
HDMI).
For digital outputs, L-PCM stereo encoding is provided
Sample rate 32 kHz, 22.1 kHz, 44.1KHz,48 kHz
Subtitles & Teletext
Subtitle DVB Subtitle
Teletext EBU TELETEXT
Rear Panel
RF IN To be connected to the Antena cable
RF OUT Connect to other STB set.
Optical S/PDIF Digital Audio output
SCART TV SCART
HDMI Digital HDTV video output with HDCP. HDMI version 1.3