Specifications, Subwoofer series specifications – Dual L10SW User Manual
Page 7
7
SUBWOOFER SERIES
SPECIFICATIONS
Specifications
FEATURES
• Gain control for volume adjustment.
• Adjustable low pass 50 Hz to 150 Hz.
• Phase switch 0-180 degrees.
• High level inputs
• Low Level Inputs and Outputs.
• Sleep mode feature integrated into the power switch for
signal sensing on/off.
SPECIFICATIONS
Driver: 10" Polypropylene cone with edge inverted poly dust cap
Amplifier: A/B class amplifier -
220 Watts Peak Power/100 Watts RMS
Frequency Response: 34 – 200 Hz
Dimensions with grille H/W/D: 15.75"x 12" x 14.75"
Weight: 29 lbs.
FEATURES
• Gain control for volume adjustment.
• Adjustable low pass 50 Hz to 150 Hz.
• Phase switch 0-180 degrees.
• High level inputs
• Low Level Inputs and Outputs.
• Sleep mode feature integrated into the power switch for
signal sensing on/off.
SPECIFICATIONS
Driver: 12" Polypropylene cone with edge inverted poly dust cap
Amplifier: A/B class amplifier -
270 Watts Peak Power/120 Watts RMS
Frequency Response: 28-200 Hz
Dimensions with grille H/W/D: 17.5"x 14.25" x 16.5"
Weight: 34.5 lbs.
* Power handling is based on amplifier volume never being
set above the point of audible distortion.
All Rights Reserved. All specifications subject to change
without notice.
L10SW
L12SW