Studio Technologies 76 V.1.10 - Manual (Page 19)

Model 76/77 User Guide Issue 7, August 2012
Studio Technologies, Inc. Page 19
for Surround
Configuration—Model 77 Device Address, Channel Mute/Solo
Function, and Stereo Output
Default: Device address A1.
Post downmix channel mute/solo.
Stereo output can be enabled.
Note: The Model 77’s device address is the only parameter stored in the Model 77. All other parameters are stored
in the Model 76.
Press and hold the Mute/Solo button
to display and configure the Model 77’s
device address, channel mute/solo
function, and stereo output function.
When the mode button is pressed, use
the Level control to change this specific
Model 77’s device address.
Address can be either A1, A2, A3, or A4.

When the
Mode button is
pressed, these
LEDs display
the status of the
stereo output
function. When
LED Surround
is lit the stereo
output func-
tion cannot be
enabled. When
LED Stereo is lit
the stereo output
function can be
enabled. Use the
button to change
the configuration.
When the Mode button is pressed, use the Channel Mute/Solo L and R
buttons to select the channel mute/solo function. Use the buttons to
change the configuration. LED L lit means pre downmix channel mute/
solo; LED R lit means post downmix channel mute/solo.