Studio Technologies IFB Plus 2007 - Manual (Page 32)

Issue 9, January 2006 Model 2 User Guide
Page 32 Studio Technologies, Inc.
Monitor Muting: switch selectable, allows Model 24
interrupt activity to mute monitor amplifier outputs on
Model 2 Central Controllers
Dimensions (Overall):
6.40 inches wide (16.3 cm)
21.60 inches high (4.1 cm)
5.20 inches deep (13.2 cm)
Mounting:
Rack mounted using Model 27A 19-Inch Rack
Adapter (purchased separately). Can also be flush
mounted in custom-fabricated rectangular opening in
enclosure or work surface.
Weight: 0.8 pounds (0.35 kg)
Model 25A 19-Inch Rack
Adapter
Application: intended for use with Model 22 Access
Station and Model 11A Gooseneck Microphone
Dimensions (with Model 22 attached):
19.00 inches wide (48.3 cm)
1.72 inches high (4.4 cm)
5.2 inches deep (13.2 cm)
Mounting: one space in a standard 19-inch rack
Weight (with Model 22 attached): 1.6 pounds
(0.7 kg)
Model 27A 19-Inch Rack
Adapter
Application: intended for use with Model 24 Access
Station and Model 11A Gooseneck Microphone
Dimensions (with Model 24 attached):
19.00 inches wide (48.3 cm)
1.72 inches high (4.4 cm)
5.2 inches deep (13.2 cm)
Mounting: one space in a standard 19-inch rack
Weight (with Model 24 attached): 1.6 pounds
(0.7 kg)
Model 28A Panel Adapter
Application: intended for use with Model 22 Access
Station and Model 11A Gooseneck Microphone
Dimensions (with Model 22 attached):
8.0 inches wide (20.3 cm)
2.75 inches high (7.0 cm)
5.2 inches deep (13.2 cm)
Mounting:
Designed to be mounted in a panel opening.
Recommended opening size 6.5 inches wide
(16.5 cm), 1.7 inches high (4.3 cm), 6.5 inches
minimum depth (16.5 cm)
Weight (with Model 22 attached): 1.3 pounds
(0.6 kg)
Model 32A Talent Amplifier
Primary Application: intended for use with Model 2
Central Controller
Indicator Light: red LED indicates operation of
internal power supply
Power/Audio Input:
Connector: 3-terminal XLR-type female
Signals: pin 1 common, pin 2 +18 Vdc modulated
with channel 1 audio, pin 3 channel 2 audio
Audio Levels: –10 dBu nominal
Power Requirements: 12 to 35 Vdc, 20 mA normal
operation, 110 mA worst case (shorted headphone
output)
Loop Through Connector:
Type: 3-terminal XLR-type male, connected in
parallel with input connector
Purpose: Intended to be used to connect multiple
talent amplifiers in a “loop through” arrangement
Audio Amplifier:
Output Connector: ¼-inch and 3.5 mm 2-conductor
(monaural) phone jacks
Load: intended for connection to headphones or
earpieces with impedance of 8 ohms or greater
Source: IFB channel 1 or channel 2, switch
selectable by user
Output Level: user adjustable via log taper
potentiometer