Stix & Drums STX 6600 - Manual (Page 10)

Fly Points
(Use only M10 Forged Steel Eye-bolts)
Remove the appropriate M10 flathead screws. Replace M10 flathead screws
with M10 Forged Steel Eye-bolts.
Top fly points (4) Bottom rear fly point (1)
(Pull back adjustment)
All fly points are reinforced
with internal steel brackets
for maximum strength
and reliability
Top fly points
for hanging.
Bottom rear fly point for
down-angle adjustment
(Pull back adjustment)
Fly points (4) are positioned on the top of each enclosure and (1) located at the bottom center.