Space Ray RSCA Series - Manual (Page 9)

Form #43219000
Sept 2012
8) OPTIONAL PARABOLIC REFLECTOR EXTENSION ASSEMBLY
The heater is completely factory assembled and requires no field assembly. If the optional parabolic reflector
extension is utilized, locate and identify the end panels and side panels as shown in the following diagram.
Attach the side panels as shown. Attach the end panels so that the end flanges of the end panels overlap the
side panels. Attach the side panels and end panels together with the screws provided in the kit. Attach the
remaining screws as shown in Detail A. This is to ensure that the Parabolic Reflector Extension is securely
attached to the reflector. The clearances to combustibles (shown on the clearance label that is secured to
the reflector on the control end of the heater and in Section 4 of these instructions) must be closely observed.
9) GAS CONNECTIONS AND REGULATION
8