Southern States Smart Tap - Manual (Page 4)

A P P L I C A T I O N G U I D E
> Directional Fault Sensing > Smart Tap
System Integration Options
The inputs are from any current sensors capable of providing an analog signal of the current and fault current waveforms.
Potential transformer inputs can be accommodated, if desired but are optional. Smart Tap measures and reports fault
information either to a local RTU or through a self contained communication system to a remote location.
SMART TAP OPERATION
30 Georgia Avenue Hampton, GA 30228
P 770-946-4562 F 770-946-8106
[email protected]
www.southernstatesLLC.com
Publication No. AG1510-SmartTap-R2 02082013
Printed in USA February 2013 ©2013 Southern States, LLC
Smart Tap
® is a registered Trademark of SSIPower
ICCP
DNP
SYSTEM INTEGRATION OPTIONS
Smart Tap provides direction information to SCADA. through local RTU and SCADA communication network. Direction
indicators can be displayed on the SCADA diagrams and to provide information to the operator to guide the sectionalizing
switching steps.
Smart Tap can be integrated into the substation and
SCADA networks with the use of optional substation
touch screen HMI servers and ICCP servers available
from SSI Power.
SCADA Display with Fault Direction Indication
RTUs or Modems
Smart Tap
HMI Server
Smart Tap Application Server