Dual side burner/griddle dimensions, Dual side burner/griddle island preparation, With optional grill cart) – DCS BFG-30BGD User Manual
Page 2
![background image](/manuals/78806/2/background.png)
Summer 2008 33
Dual Side Burner/Griddle Dimensions
(with optional grill cart)
Dual Side Burner/Griddle Model: BFG-30BGD
Cart Model: CAD-30 (shown with optional side shelves)
Dual Side Burner/Griddle
Island Preparation
Dual Side Burner/Griddle Model: BFG-30BGD
We encourage you to find out more about these features and learn how they
can make your cooking experience more enjoyable by visiting our learning
page at: www.dcsappliances.com.
Because of continuing product improvement these specifications are subject
to change without notice.
36”
26.5”
24”
30”
10-1/2”
MODEL NUMBER
BFG-30BGD
GRIDDLE 12,000
BTU/HR
SIDE BURNERS
2 @ 17,000 BTU/HR
SHIPPING WEIGHT
(SIDE BURNER/GRIDDLE HEAD)
120 LBS.
SHIPPING WEIGHT
(OPTIONAL CART)
120 LBS.
SHIPPING DIMENSIONS
Ordering Data:
Please specify gas type (natural or propane) when ordering
Gas Requirements:
Natural
• 1/2" NPT male with a 3/8" flare adapter
• Operational Pressure: 4” W.C.
• Supply Pressure: 6" to 9” W.C.
Propane
• 1/2" NPT male with a 3/8" flare adapter
• LP hose with a quick disconnect & fitting are shipped
connected
• Operational Pressure: 11” W.C.
• Supply Pressure: 11" to 14” W.C.
Power Requirements:
• 9V battery
Island Ventilation Requirements:
It is recommended that adequate ventilation holes must be
provided in the base of an enclosure in the event of a gas leak.
Side burner/Griddle Placement:
DO NOT build side burner/griddle under overhead unprotected
combustible construction. Use only in well-ventilated areas.
These units are for outdoor use only. If located in a consistently
windy area (oceanfront, mountaintop, etc.) a wind break will be
required.
Conversion Kits:
NG to LP and LP to NG conversion kits are available from your
dealer.
Accessories
• Stainless Steel Grill Cart (CAD-30)
• Single or double side burners for built-in application
• Stainless Steel Access Doors for built-in application
• Stainless Steel Access Drawers for built-in application
• Insulated Jacket for built-in application
• Brazilian Cherry Chopping Board that fits in cart optional
side-shelf
• Vinyl Grill Cover
• Wok and Wok Ring for use on side burners
access doors
(ADN20x30)
access drawer
(ADR30)
Vent
4” x 4” opening for
gas supply line
3” to non-combustible
construction and
12” min. combustible
construction
* Standard cut-out dimensions for non-combustible enclosure
** Insulated jacket cut-out dimensions for combustible enclosure
Island installation to use minimum of 3 vents providing
10 square inches per vent (typical)
Vent
Vent
32” X 32” X 16”
(SIDE BURNER/GRIDDLE HEAD) (HEIGHT X WIDTH X DEPTH)
magalog summer 2008.2.qxd 4/24/08 1:57 PM Page 33