SOLAC ME7711 - Manual (Page 15)

15
en
Use
6 Use
Z
This appliance has been designed to provide therapeutic massages to
help prevent cellulite, fluid retention and flaccidity. Do not use it for any
other purpose.
i
Massaging with this professional appliance generates a thermal effect in
the treated area; this thermoactive effect helps to mobilise the
accumulated fats and toxins. To gently intensify the treatment, the
appliance has an infrared light that slightly increases the thermal action
of the appliance.
1 Plug in the appliance (fig. 1).
2 Move the switch (2) to the massage position (fig.2 B) or to the “massage
+ infrared position (IR) position” (fig.2 C) according to the desired
treatment.
3 Fit the correct head, (7), (8), (9), (10), (11) or (12), for the treatment you
require to the adaptor (5) (fig. 3).
i
To remove the head, pull firmly at the edge to release the fastening tabs.
(fig. 3).
i
To choose which massage head to use, follow the instructions in the
“Treatment Type” table.
i
You may alternate the use of different heads during the same massage.
4 Set the intensity of the massage using the intensity control (3) and place
the massager on the area on which you are going to work.
5 Set the intensity of the massage using the control (3), according to the
area to be treated and its sensitivity to massage (see the “Treatment
Type” table).
To do so, turn the control to one side or another with your finger,
depending on the desired intensity (fig. 4).
6 Hold the massager firmly with both hands and move it over the skin in
the direction of the blood circulation (see “Massage Direction”).
i
Without pressing too hard, simply glide the massager over the area to be
treated.
7 When you have finished using the massager, move the switch (2) to the
“off” position (fig.2 A).
8 Unplug the appliance.
ME7711.book Page 15 Tuesday, November 30, 2010 10:57 AM