beautypg.com

Care and maintenance, Cutter blade maintenance – Dixon Zeeter Zero-Turn Riding Mower User Manual

Page 33

background image

CARE AND MAINTENANCE

33

CUTTER BLADE MAINTENANCE:

CAUTION Stop engine and remove ignition key

for safety. Wear heavy, thick gloves
when holding onto cutter blade, avoid
the sharp edge of the blade.

Blades should be discarded when worn excessively.

DANGEROUS!
DO NOT USE
BLADE IN THIS
CONDITION!

When notch starts,
discard blade

New Blade

Check sharpness of mower blades after every 10
hours of operation. Observe proper blade position
prior to removal.

1. Safely raise front of mower.

2. Hold or block blade from

turning.

3. Loosen blade bolt and remove

blade.

4. When replacing blade, tighten

blade bolt securely. Refer to
diagram. Be sure blade is
centered on pilot before
tightening nut to 60 ft. lbs.