Smithco Super Star 42-000-F (sn 6390 -Current) Parts & Service Manual - Manual (Page 101)

B-27
Center Attachment
42-179 SCARIFIER MOUNTING PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 HHP-18 Bridge Pin 1 /
8
3
2 10-135 Hydraulic Cylinder (part of machine) 1
3 HCP-58-175 Clevis Pin 5 /
8
x 1 3 /
4
1
4 HB-12-13-500 Bolt 1 /
2
- 13 x 5 4
HNTL-12-13 Lock Nut 1 /
2
- 13 4
5 HCP-12-200 Clevis Pin 1 /
2
- 2 2
6 18-154 Rod End (part of machine) 1
7 42-217 Cylinder Mount (part of machine) 1
INSTALLATION INSTRUCTIONS
1. Assemble the Scarifier as shown on previous page.
2. Remove the rod end (Ref 6) on the hydraulic cylinder (Ref 2) from the cylinder mount (Ref 7). Remove the
cylinder mount (Ref 7) from the machine.
*3. Place the handle and linkage onto the empty linkage port of the two bank valve on the machine.
4. Slide the Scarifier under the machine lining up the hydraulic cylinder and the center of the attachment lift
assembly.
5. Extend hydraulic cylinder all the way down by pushing the lever forward.
6. Mount the rod end of the cylinder onto the attachment lift assembly and secure with a clevis pin and
bridge pin.
7. Attach the arms on the attachment lift to the attachment mount on the machine and secure with clevis pin
and bridge pin.
8. Turn machine on and test for proper operation.
9. Adjust castor wheels by placing the short or long spacer on the castor wheel fork before placing the
castor wheel assembly into the castor wheel brackets. Be sure both castor wheels are adjusted to the
same height.
* For machines prior to serial numbers 4500 (3WD) and 12500 (2WD).