Smart Avi SM-RS232 - Manual (Page 4)

4
www.smartavi.com
Installation
1. Turn off all devices.
2. Connect an RS-232 cable from the console computer to the SM-RS232.
3. Connect up to 16 RS232 compliant devices to the SM-RS232 using CAT5/5e/6 cabling with
RJ45 to DB9 adapters (not included).
4. Connect the power cord to power-on the SM-RS232.
5. Power on the devices.
Control
1. First you will need to set up the terminal
application.
APPLICATION DIAGRAM
Console
Control
SM-RS232
TCP/IP
Control
Signage
Players
Routers, Switches,
Matrixes
SMTCP-R
• Open Hyperterminal on the PC. (or use
the terminal client of your choice)
• Use the default settings to create a
connection to the device. Settings MUST
match those shown on the right.
• Be sure that Flow Control is None.
• The output of the device will be the same
as the PC.