Smart Avi FX-USB - Manual (Page 2)

Introduction
The FX-USB is a perfect solution for extending USB 2.0
signals from a computer in a remote location. It extends
USB 2.0 to a remote location up to 1,500 feet away. It
supports all USB device types from high-speed web
cams, hard drives, printers, scanners, audio devices,
touch screens, digital cameras and game controllers.
The FX-USB is immune to electromagnetic interference,
making it ideal for use in situations where there is
considerable interference. The FX-USB is also very
secure because it’s fiber optic signals cannot be easily
tapped.
Connecting the FX-USB
1. Power off all devices.
2. Connect the USB source (computer) to the USB
port on the front of the FX-TXUSB (transmitter).
3. Connect the FX-TXUSB (transmitter) to the FX-
RXUSB (receiver) using a fiber optic cable up to
1,500 feet in length.
4. Connect up to four USB 1.1 devices to the
integrated 4-port USB hub on the front of the FX-
RXUSB (receiver).
5. Connect the power supply to the FX-RXUSB and
the FX-RXUSB.
6. Power on the computer and USB devices.
Applications
• Security
• PC Networking
• Conference Center Systems
• Point of Sale
• Camera Surveillance
• Video Phone
• Control Room Systems
• Recording Studio
• PC KVM Extension
Features
• Top Signal Quality at Maximum Extension
Over Multimode Fiber (1,500 ft.)
• Fiber Plug Type LC
• Extends USB 2.0 signals up to 1,500 feet from the
computer
• Fully compliant with USB 1.1 and 2.0 specifications
• Supports USB 1.1 (12 Mbps) and USB 2.0 (480
Mbps) data rates
• Supports all USB device types from high-speed
web cams, hard drives, printers, scanners, audio
devices, touch screens, digital cameras and game
controllers
• Integrated Four-Port Hub in the receiver
• Compatible with all operating systems
• Fully transparent USB (does not use any emula-
tion)
• Plug and play
Product - Installation Diagram
FX-TXUSB Front
FX-RXUSB Rear
FX-TXUSB Rear
FX-RXUSB Front LED Indicators
Power (Blue)
Steady = Power is connected
Link (Green)
Steady = RX and TX are connected through fiber
Host (Green)
Steady = PC is connected
Blinking = Suspended state/Not Connected
Activity (Amber)
Blinking = Communication between RX and TX
Off = Suspended state/No Activity
up to 1,500 ft over Fiber
FX-USBTX FX-USBRX
USB 2.0
HARD DRIVE
USB 2.0
MOUSE
USB 2.0
PRINTER
USB 2.0 KEYBOARD
COMPUTER