Smart Avi SKM-08 - Manual (Page 8)

8 © 2014 SmartAVI, Inc.
SKM-08
DISPLAY TOPOLOGY CONFIGURATION
The SKM-08 has a configurable display topology configuration that can be
easily activated through keyboard hotkeys or through RS-232 commands.
No software or drivers required for configuring the display topology.
Hotkey Command: Hotkey Command: Hotkey Command: Hotkey Command: “ctrl + ctrl + h h h h + 8 8 8 8 + ENTER”
RS RS RS RS----232 Command: 232 Command: 232 Command: 232 Command: //h h h h8 8 8 8
Hotkey Command: Hotkey Command: Hotkey Command: Hotkey Command: “ctrl + ctrl + h h h h + 4 4 4 4 + ENTER”
RS RS RS RS----232 Command: 232 Command: 232 Command: 232 Command: //h4 h4 h4 h4
Hotkey Command: Hotkey Command: Hotkey Command: Hotkey Command: “ctrl + ctrl + h h h h + 2 2 2 2 + ENTER”
RS RS RS RS----232 Command: 232 Command: 232 Command: 232 Command: //h2 h2 h2 h2
Hotkey Command: Hotkey Command: Hotkey Command: Hotkey Command: “ctrl + ctrl + h h h h + 1 1 1 1 + ENTER”
RS RS RS RS----232 Command: 232 Command: 232 Command: 232 Command: //h1 h1 h1 h1
1 2 3 4 5 6 7 8
1 2 3 4
5 6 7 8
1 2
3 4
5 6
7 8
1
2
3
4
5
6
7
8
Each of the cells shown represents a display
or multiple displays from a computer.
Notes:
+ PASS Technology can only be used in sin-
gle-head display mode.
+ If one or more of the eight computers have
multiple displays, multi-head display mode
switching must be used.