Smart Avi HR-2P - Manual (Page 2)

Qty Description Part Number
1
HDMI Router/Switch
2Port Includes HR-2P and
PS5VDC1A-C
HR-2PS
1
Remote control Unit
(optional)
RMT-HR
1 IR-eye for HDMI switch EYE-IRH
This switcher is HDMI V1.3 Compliant and supports
up to 36-bit Deep Color, Dolby True-HD or DTS HD
Audio formats. IR Remote can fully select input for
output independently, or push button on Front
panel can do the same.
The especially recommended 2x1 HDMI switch al-
lows up to four HMDI source devices to be indepen-
dently switched to on HDMI compatible monitor,
HDTV’s and/or projector.
Introduction
‡6XSSRUW+'0,EGHHSFRORUVLJQDO
‡0DLQWDLQVSSLDQGSYLGHR
formats
‡6XSSRUWV+'0,GLJLWDODXGLRIRUPDW/3&0
Dolby-AC3/DTS7.1/DSD
‡0DQXDORSHUDWHGRU,5UHPRWHFRQWUROERWKDUH
available
‡$7& +'&3FRPSOLDQW
‡&RQQHFW)RXU+'0,&RPSRQHQWVWRDQ+'79
Monitor
‡6HDPOHVV6ZLWFKLQJ%HWZHHQ+'0,6RXUFHV
Features
What’s in the box?
HR-2P
Please check the contents of the package before
beginning installation.
Installation and Operation
Connecting the Converter
1. Connect the HR-2P to the TV/Monitor with HDMI
cable(included with the unit).
2. Connect all the source to the HR-2P via HDMI
cable.
3. Connect Power Adaptor.
Channel Selection
You can select the channels you want to access in two
ways. Front panel push button selection and remote control
included with the package content.
FRONT PANEL PUSH BUTTON SELECTION
The front panel push button is used to select whicchannel is
currentlydisplayed on the HDTV. Pressing the button during
normal operation will cause next channell to be selected.
REMOTE CONTROL SELECTION (IR)
The channel can also be selected through the attached
remote. Push the IR code button o the remote control panel
for 2 seconds.
Connection Diagram
To TV
IR Control
HDMI Cables,
to devices
IR and Remote
DC 5V 1A SELECT
Power
LED
Power
OUTPUT
INPUT 1 INPUT 2
IR
PC
DVD
HR-2P HDMI
Monitor