Smart Avi DVS2P - Manual (Page 2)

Introduction
The DVS2P splitter allows you to use a single PC to
display identical images on multiple monitors.
DVI Splitter is ideal for:
„ Test bench facilities
„ Data Center
„ Help Desks
Features
„ Use PanelLink digital technology
„ Supports high-resolution dislplay up to UXGA
(25-165MHz)
„ Can be cascaded
„ Compliant with the specification of DVI 1.0
Package Contents
„ 1 Smart-AVI DVS2P DVI Splitter
„ 1 User Manual
„ 1 Power Adapter DC 7.5V 1.5A
Installation
1. Turn off computer and monitor.
2. Connect DVI male extension cable between the
PC and the “video in” port of splitter.
3. Connect the DVI male/female extension cables
between the monitors and the “DVI out” ports of
splitter.
4. Connect the power cord and turn on the splitter.
5. Turn on PC and monitors.
Operation for Cascade
1. The function to display identical images on more
monitors, is an attachment of another splitter.
2. Connect the DVI male/female extendion cable
between the former splitter of the “DVI out 1”
port and the latter splitter of the “video in” port.
Note: Note: Note: Note: Note:
Even though you are allowed to cascade the splitter
with varied ports, the image might become unstable if
you cascade too many tiers of splitters.
Installation Diagram
HDMI Widescreen TV HDMI Widescreen TV
DVS2P
PC
Optional DDC Pass-Through
If you would like the computer to read EDID
information directly from your monitor instead of
the internal EEPROM in the DVS2P, perform the
following steps.
1. Turn off computer and monitor.
2. Disconnect power adapters.
3. Remove screws on the sides of the transmitter.
4. Lift the top off of the chassis
5. Locate headers labeled J13 and J12.
6. Reconfigure the jumpers as shown.
7. Replace chassis top and screws.
J13 J12