Smart Avi AVS4P - Manual (Page 2)

Introduction
The
AVS4P splitter allows you to use a single PC to
display identical images on multiple monitors. AVS Splitter is ideal for: „
Test bench facilities
„
Data Center
„
Help Desks
Package Contents „
1 AVS4P 4Port AVI splitter
„
1 User Manual
„
1 Power Adapter 5VDC 1A
Installation Diagram
Features „ „ „ „ „ „ „ „ „ „ „ „ „ „
Supports high resolution clear video up to 1900x1200. 400 MHz Bandwidth. Sends high-resolution VGA and Stereo Audio signals from one source too up to 4 monitors/speakers. Broadcast too up to 4 Audio/Video output devices through daisy chain capability. Each output reach up to 100ft. Compatable with VGA, XGA, Sun, MAC and SGI signals. Supports high-resolution clear video, up to 1900 x 1200. Sync Format/Polarity Preservation. Compatable with Line Level Stereo Audio signals. High ground loop immunity. Built-in lightning, power surge and transient protection. Remote units come with 2 buffered outputs. Designeted trimmer in the remote unit to compensate for cable length. Metal case enclosure.
Installation
1. Turn off the box 2. Connect the HD-15 video cable betwee the “video output” of PC and “video in” port of the video/audio splitter.use a male to female cable. 3. Connect the audio cable between the audio output device and the “audio in” port of video/audio splitter use a male to male cable. 4. Connect all monitors to the ports labeled out 5. Connect all the speakers to audio lebeled out 6. Turn on the box