Smart Avi HDX Ultra - Manual (Page 2)

Introduction
The HDX-Ultra uses only one CAT5 UTP cable to extend
HDMI signals such as HDTV output over 330ft (100m)
from the source. It is capable of transmitting high-
resolution HD video up to 1080p. Controlling your
video source is easy with the HDX-Ultra’s bi-directional
IR and RS-232 extension. Whether it’s for a home
entertainment system or a commercial installation, the
HDX-Ultra delivers flexibility and control.
Features
• Extends HDMI output over one CAT5/5e/6 UTP cable
• Extends IR and RS-232 control signals for remote
control
• Delivers uncompressed HD video up to
1080p@60Hz@48bits and 3D
• Data signals up to 3.4Gbps
• HDMI 1.3 and HDCP compliance
• IR and RS-232 communication are bi-directional
• Transmits high-quality Dolby TrueHD, DTS-HD MA
audio signals
• Transmits 1080p resolution over 330 feet (100
meters) from the source
Applications
• Home Theater
• Corporate or Educational Presentations
• Call Centers
• Industrial
• Information Terminals/Kiosks
• Airport Installations
• Educational Environments
Installation
1. Power off the HDMI source, display and speakers.
2. Connect an HDMI cable from the HDMI source to the HDMI port on the HDX-Ultra transmitter.
3. Connect an IR emitter/receiver (optional) to the IR ports on the HDX-Ultra transmitter.
4. Connect an RS-232 compliant device (optional) to the RS-232 port on the HDX-Ultra transmitter.
5. Connect the HDX-Ultra transmitter to the HDX-Ultra receiver using a CAT5 UTP cable (up to 330ft/100m).
6. Connect an IR emitter/receiver (optional) to the IR ports on the HDX-Ultra receiver.
7. Connect an RS-232 compliant device (optional) to the RS-232 port on the HDX-Ultra receiver.
8. Connect an HDMI cable from the HDMI port on the HDX-Ultra receiver to the HDMI Display.
9. Power on the HDX-Ultra transmitter and receiver by plugging in their power adapters (5VDC2A).
10. Power on the HDMI source, displays and speakers.
HDTV and Speakers
Remote Control
330ft (100m) CAT5 UTP
IR Receiver
IR Emitter
HDX-Ultra-TX HDX-Ultra-RX
HDMI Source
HDX-Ultra - Installation Diagram
HDX-Ultra-TX-Front
HDX-Ultra-TX-Rear
HDX-Ultra-RX-Front
HDX-Ultra-RX-Rear
CONNECTOR PAIR PINS
1 1 & 2
2 3 & 6
3 4 & 5
4 7 & 8
CAPACITANCE 14 pf/ft (46.2 pf/m)
CONDUCTOR GAUGE 24 AWG
IMPEDANCE 100 +/- 15 ohms
CAT5/5e/6 CABLE SPECIFICATIONS
RJ-45 MALE RJ-45 FEMALE
12345678 87654321
CONNECTOR PIN NAME DESCRIPTION
2 RxD Receive Data on DB9 Male
3 TxD Transmit Data on DB9 Male
5 SGND Ground
2 TxD Transmit Data on DB9 Female
3 RxD Receive Data on DB9 Female
5 SGND Ground
DB9 FEMALE - TRANSMIT
RS-232 SPECIFICATIONS
DB9 MALE - RECEIVE