Smart Avi HDX-Plus - Manual (Page 2)

Introduction
The HDX-Plus uses two CAT5 UTP/STP cables to extend
HDMI signals such as HDTV output over 200ft (60m)
from the source. It is capable of transmitting high-
resolution HD video up to 1080p. Controlling your
video source is easy with the HDX-Plus’s bi-directional
IR and RS-232 extension. Whether it’s for a home
entertainment system or a commercial installation, the
HDX-Plus delivers flexibility and control.
Features
• Extends HDMI output over two CAT5/5e/6 UTP/STP
cables
• Extends IR and RS-232 control signals for remote
control
• Delivers uncompressed HD video up to
1080p@60Hz@48bits and 3D
• Data signals up to 3.4Gbps
• HDMI 1.3 and HDCP compliance
• IR and RS-232 communication are bi-directional
• Transmits high-quality Dolby TrueHD, DTS-HD MA
audio signals
• Transmits 1080p resolution over 200 feet (60 meters)
from the source
Applications
• Home Theater
• Corporate or Educational Presentations
• Call Centers
• Industrial
• Information Terminals/Kiosks
• Airport Installations
• Educational Environments
For Better Performance
Use 2 x CAT6/STP 23 AWG Cables.
Installation
1. Power off the HDMI source, display and speakers.
2. Connect an HDMI cable from the HDMI source to the HDMI port on the HDX-Plus transmitter.
3. Connect an IR emitter/receiver (optional) to the IR ports on the HDX-Plus transmitter.
4. Connect an RS-232 compliant device (optional) to the RS-232 port on the HDX-Plus transmitter.
5. Connect the HDX-Plus transmitter to the HDX-Plus receiver using two CAT5 UTP/STP cables (up to 200ft/60m).
6. Connect an IR emitter/receiver (optional) to the IR ports on the HDX-Plus receiver.
7. Connect an RS-232 compliant device (optional) to the RS-232 port on the HDX-Plus receiver.
8. Connect an HDMI cable from the HDMI port on the HDX-Plus receiver to the HDMI Display.
9. Power on the HDX-Plus transmitter and receiver by plugging in their power adapters (5VDC2A).
10. Power on the HDMI source, displays and speakers.
HDTV and Speakers
Remote Control
2 x 200ft (60m)
CAT5 UTP/STP
IR Receiver
IR Emitter
HDX-Plus-TX HDX-Plus-RX
HDMI Source
HDX-Plus - Installation Diagram
CONNECTOR PAIR PINS
1 1 & 2
2 3 & 6
3 4 & 5
4 7 & 8
CAPACITANCE 14 pf/ft (46.2 pf/m)
CONDUCTOR GAUGE 24 AWG
IMPEDANCE 60 +/- 15 ohms
CAT5/5e/6 CABLE SPECIFICATIONS
RJ-45 MALE RJ-45 FEMALE
12345678 87654321
CONNECTOR PIN NAME DESCRIPTION
2 RxD Receive Data on DB9 Male
3 TxD Transmit Data on DB9 Male
5 SGND Ground
2 TxD Transmit Data on DB9 Female
3 RxD Receive Data on DB9 Female
5 SGND Ground
DB9 FEMALE - TRANSMIT
RS-232 SPECIFICATIONS
DB9 MALE - RECEIVE
HDX-Plus-TX-Front
HDX-Plus-TX-Rear
HDX-Plus-RX-Front
HDX-Plus-RX-Rear