Smart Avi UTX-500 - Manual (Page 2)

Up to 275 ft over CAT5
UTX-TX500 UTX-RX500
USB HARD DRIVE
USB KEYBOARD USB MOUSE USB PRINTER
SPEAKERS
MONITOR
COMPUTER
Introduction
The UTX-500 extends WUXGA, audio and transparent
USB 1.1 up to 300 feet over two CAT5 cables. The
recevier has an integrated 4-port USB hub. With fully
transparent USB the UTX-500 supports any USB devices
including USB keyboards, mice, cameras, flash drives,
hard drives and more.
Connecting the UTX-500
1. Power off all devices.
2. Connect the WUXGA video source (computer) to
the front of the UTX-TX500 (transmitter) using a
male-to-male VGA cable.
3. Connect the USB source (computer) to the USB
port on the front of the UTX-TX500 (transmitter).
4. Connect an audio source (computer) to the audio
port on the front of the UTX-TX500 (transmitter).
5. Connect the UTX-TX500 (transmitter) to the UTX-
RX500 (receiver) using 2 CAT5 cables up to 300
feet in length.
6. Connect a VGA monitor to the front of the UTX-
RX500 (receiver).
7. Connect up to four USB 1.1 devices to the
integrated 4-port USB hub on the front of the
UTX-RX500 (receiver).
8. Connect speakers to the front of the UTX-RX500
(receiver).
9. Connect the power supply to the UTX-RX500 and
the UTX-RX500.
10. Power on the computer, monitor, USB devices and
speakers.
Applications
• Security
• PC Networking
• Conference Center Systems
• Point of Sale
• Camera Surveillance
• Video Phone
• Control Room Systems
• Recording Studio
• PC KVM Extension
• MAC Keyboard Mouse ExtenderPC KVM Extension
• MAC Keyboard Mouse Extender
Features
• Plug and play, no software required
• Supports WUXGA video extension for resolutions
up to 1920 x 1200
• Fully compliant with USB 1.1 specifications
• Supports 1.5 and 12 Mbps data rate
• Built-in skew compensation
• Uses a single CAT5 UTP cable
• External power adapter for transmitter and re-
ceiver unit
• Fully transparent to any type of USB 1.1 device
Product - Installation Diagram
UTX-RX500 Front
UTX-RX500 Rear
UTX-TX500 Front
UTX-TX500 Rear