Dell 2335DN - Manual (Page 4)

Open Manage Printer Manager – Release Notes 4
• Northbound action can now send as proxy. With this option set, there are no
issues with XP’s security patch. The application attempts to spoof sourceIP
on packet only when the proxy option is not selected.
• This application’s server on Windows 2000 may not recover well if it loses
network connectivity. Network connectivity is required to use the applica-
tion. This only occurs with "Link Downs" (unplugging the server cable, shut-
ting down the switch its plugged into, etc). Loss of network connectivity via
the IP network (Layer 3) will not cause any problems. Workaround: You must
restart system if this problem occurs. (13870)
• Trap listener, Inform listener and all outbound SNMP requests must bind to a
specific interface in a multi-homed environment. This interface is considered
appropriate to use for all network-facing SNMP activity. By default, this is
localhost, interpreted as the application's local IP value (the NIC selected at
installation time). The following text in installed.properties provides a spe-
cific IP address to control outbound SNMP interface binding on the local
machine (22258):
#
# specific interface used for all NMS initated
# communications to the network
com.dorado.mediation.outbound.address=localhost
Include the following text and provide a specific IP address to control
inbound (listener) interface binding on the local machine:
#
# specific interface used for binding mediation
# listeners such as SNMP trap listener
com.dorado.mediation.listener.address=localhost
• Logical Topology: Contact filters do not retain their settings after operation.
(14133)
Printer-Specific Issues
Unsupported Printers
The following Dell printer models and adaptor are not supported by this soft-
ware:
Dell AIO Ink printers
Dell Photo printers
Dell Laser Printer 1110 and others without the “n” suffix
Dell Wireless Printer Adapter 3300
• This software cannot write to Dell 5330 & Dell 2335 printers.
• Changing ethernet settings from 100 Base T Half to 100 Base T Full does not
change the Current Speed field. It remains as 100 Base T Half Duplex.
Workaround: Begin the change from some setting other than 100 Base T
Half. (44344 / 226)