Silvestri Sliding adapter D7023 - Manual

In the picture on the right is underlined in the (01)
position the unlocking element, by acting a slight
pressure on it, the sliding element unlocks for
passing from the viewing position to the shooting
position:
a) Central with horizontal framing
b) Shifted 18,5mm to the right (shot 1) shifted
18,5mm to the left (shot 2). The two stitched
shots will produce an image 49X72mm with the
sensor placed in the vertical position ( diagonal
87mm.) While if the sensor is placed in the
horizontal position a final image of 37X86mm will
be produced; panoramic format ( diagonal 93mm.)
In the image on the left side, you can notice
the unlocking cursor of the Hasselblad H
adapter plate (03) and the security button
(02); to unlock the plate first press the
security button (02) and move the cursor
(03).
Image on the right:
The unlocking of the Hasselblad H digital back is made
on the back of the adapter plate. Slide the cursor (04)
with the point of a pen and the digital back unlocks,
perform the same operation to attach the digital back.
Before completely removing the digital back make sure
the cursor has moved back to its locking position.
01
02
03
04
Via Della Gora 13/5 - 50025 Montespertoli FI, Italy
e.mail [email protected] - www.silvestricamera.com
Tel +39.0571.675049 Fax +39.0571.675919
silvestri
Produced with CNC technology, the D7023 back has an extremely high precision and despite the complexity
of a modular system, preserves the capability of using very short focal length lenses whilst still ensuring
the accuracy.
It is easy to see the advantages of this solution, the D7023 back substantially widens the possibility
of use and the possible solutions.
Instructions