SIGMA SD1 - Manual (Page 78)

77
z The exposure bracketing can be used with 4 different modes.
P Mode ; Both shutter speed and aperture value will be changed.
A Mode ; Only shutter speed will be changed.
S Mode ; Only aperture value will be changed.
M Mode ; Only shutter speed will be changed.
WARNING !!
•
Once you set the auto bracketing mode, the camera will continuously hold
that auto bracketing mode until you set the bracketing amount to “0.0”.
•
Auto Bracketing function cannot be used with the flashgun. When the built-in
flashgun is active, Auto Bracketing will be turned off.
•
While the D-dial is set to the position, the function for conserving
battery power, such as Auto Power Off and LCD Off, will not work. To
benefit from this function, please set the D-dial to the drive area.
z
When you set the self-timer mode, the camera will automatically take three
consecutive pictures.
z It is possible to change the drive mode during the Auto Bracketing operation.
But if you set the self-timer mode, the camera will take three continuous
pictures.
z It is possible to change the Auto Bracket order and the number of possible
frames. Please set from [ Capture Settings] (P.28) → [Auto Bracket
Setting].
3 0
►
-
►
+
(Default)
Three frames
appropriate exposure → under exposure → over exposure
3 -
►
0
►
+
Three frames
under exposure → appropriate exposure → over exposure
3
+
►
0
►
-
Three frames
over exposure → appropriate exposure → under exposure
5 0
►
-
►
+
Five frames
appropriate exposure → under exposure → over exposure
5 -
►
0
►
+
Five frames
under exposure → appropriate exposure → over exposure
5
+
►
0
►
-
Five frames
over exposure → appropriate exposure → under exposure
z When Five frames is selected on Auto Bracketing mode, the shift value can be
set up to ±1.7.