Sensoray 2263 - Manual (Page 20)

Gets the curently set recording mode for saved files. Please see
mid2263types.h for the description.
recmode
A pointer to the variable receiving the recording mode.
devid
device id in the system (use 0 with a single board installed).
strmidx
stream index (0 or 1).
S2263_SetBitrate
MID2263_API int __stdcall S2263_SetBitrate(
int bitrate,
int devid,
int strmidx);
Sets the bitrate for H.264 encoding, in kilobits per second (kbps). Allowed
range: 100-20000 kbps.
It is recommended to stay above 700 kbps for full size (640x480 and larger)
resolutions.
bitrate
bitrate in kbps.
devid
device id in the system (use 0 with a single board installed).
strmidx
stream index (0 or 1).
S2263_GetBitrate
MID2263_API int __stdcall S2263_GetBitrate(
int *bitrate,
int devid,
int strmidx);
Gets the current bitrate settings, in kilobits per second (kbps).
bitrate
a pointer to the variable receiving the bitrate value in kbps.
devid
device id in the system (use 0 with a single board installed).
strmidx
stream index (0 or 1).
20