Danby DCRM71BLDB - Manual (Page 2)

Remove exterior and interior packaging, wipe the outside thoroughly with a soft dry cloth and the inside with a
wet, lukewarm cloth. Avoid placing the unit in a narrow recess or near any heat source, direct sunlight, or
moisture. Let air circulate freely around the unit. Keep the rear of the refrigerator 5 inches away from the wall.
Location
1) Select a place with a level floor.
2) Allow 5 inches of space between the back of the refrigerator and any adjacent wall.
3) Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources nearby will
cause higher electricity consumption.
4) Avoid damp places. Too much moisture in the air will cause frost to form very quickly on the evaporator,
and your refrigerator will have to be defrosted more frequently.
SAVE THESE INSTRUCTIONS!
IMPORTANT SAFETY INSTRUCTIONS
ELECTRICAL
REQUIREMENTS
This appliance must be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electrical shock by providing an escape wire for the
electrical current.
This appliance is equipped with a cord having a
grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly
installed and grounded.
IMPORTANT WARNING
An empty refrigerator can pose a threat to children.
To render the unit harmless we strongly recommend
removing the door prior to disposal.
WARNING - Improper use of the grounding plug can
result in a risk of electric shock. Consult a
qualified electrician or serviceman if the grounding
instructions are not completely understood, or if
doubt exists as to whether the appliance is properly
grounded.
DO NOT USE AN EXTENSION CORD
Use an exclusive wall outlet. Do not connect your
refrigerator to extension cords or together with any
other appliance in the same wall outlet.
1
INSTALLATION INSTRUCTIONS
DOOR REVERSAL
INSTRUCTIONS
CAUTION: To avoid personal injury to yourself and/or property, we recommend
someone assist you during the door reversal process.
If you find the direction of opening the door on your appliance inconvenient, you can change it by following
the steps shown in the below diagrams.
Fig. 1 Fig. 2 Fig. 3 Fig. 4