Sensoray 615 - Manual (Page 8)

8
Connectors and Jumpers
Input video connector, J1
Pin Signal Pin Signal
1 Ground 2 Input 1
3 Ground 4 Input 2
5 Ground 6 Input 3
7 Ground 8 Input 4
9 Ground 10 Input 5
11 Ground 12 Input 6
13 Ground 14 Input 7
15 Ground 16 Input 8
17 Ground 18 Input 9
19 Ground 20 Input 10
21 Ground 22 Input 11
23 Ground 24 Input 12
25 Ground 26 Input 13
27 Ground 28 Input 14
29 Ground 30 Input 15
31 Ground 32 Input 16
33 - 34 -
Termination jumpers (JP2-JP17)
Jumpers JP2-JP17, when removed, disconnect 75 Ohm termination resistors from video inputs 1-16,
respectively. The board is shipped with jumpers installed.
Bracket ground jumper (JP1)
Jumper JP1, when removed, disconnects the bracket from the video signal ground. The board is
shipped with the jumper installed.