Sensoray 812 - Manual (Page 15)

15
Specifications
Video Formats NTSC, PAL, SECAM
Video Inputs 8 input channels, simultaneously:
8 Composite video, via DB15 connector, 75 Ohms;
Or, via a 34-pin connector, 75 Ohms
Audio Inputs 8 input channels, simultaneously:
8 mono for each channel, via DB15 connector;
Or, via a 34-pin connector, 75 Ohm
Signal level: Line-in level, +/- 1.0V
Capturing Mode Raw:
UYVY/Y422, YUYV/YUY2, YUV420, RGB555/RGB565
Capture rate Up to: 240 (30x8) frames/sec for NTSC/RS-170/CCIR
200 (25x8) frames/sec for PAL/SECAM
Frame/Video
Encoding
Could be done by software and/or 3 rd party’s CODEC:
JPEG, MPEG-1/2/4, MJPEG, and H.264
Resolution Up to Full-D1:
NTSC: 720x480 PAL: 720x576
Supported:
D1.N: 720x480 D1.P: 720x576 D.5: 480x352
SIF: 352x240 2SIF: 704x240 4SIF: 704x480
VGA: 640x480 QVGA: 320x240 QQVGA: 160x112
CIF: 352x288 QCIF: 176x144 SQCIF: 128x96
4CIF: 704x576
Digital I/O 8 inputs or 8 outputs: TTL signals
configurable inputs/outputs
via a 34-pin break-in/out connector
via 8 I/O terminal blocks (optional)
Bus PCI-Express lane x1: Compliant with
PCI-Express Base Specification Revision 1.1 and 2.0
OS Platform Windows and Linux
Power <1W, +3.3V @ 300mA
Temperature 0 – 70 C
Board Size 4.2” x 4” (107mm x 100mm)