Sensoray 614 - Manual (Page 12)

Configuration DIP Switches
Interrupt Routing Select DIP switch, SW2:
The DIP switch, SW1, is used for selecting PCI interrupt routing for the Model 614.
Refer to the following tables to choose a right/preferred PCI interrupt routing for Model 614:
SW2-1 SW2-2 SW2-3 SW2-4 Interrupt used
ON (down) OFF (up) OFF (up) OFF (up) INTA#
OFF (up) ON (down) OFF (up) OFF (up) INTB#
OFF (up) OFF (up) ON (down) OFF (up) INTC#
OFF (up) OFF (up) OFF (up) ON (down) INTD#
All other combinations Not valid
PCI JTAG Enabling DIP switch, SW1: Optional
The DIP switch, SW1, is used for connecting PCI JTAG signals to the SAA7135HL JTAG port.
DIP Signal
SW1-1 TRST#
SW1-2 TMS
SW1-3 TCK
SW1-4 TDO
SW1-5 TDI
Device Driver and SDK
Device driver and SDK including driver API & demo application programs are available for both
Windows and Linux.
Windows
Sensoray Co. provides 314 WDM driver and DirectX filter for Windows platform. The SDK is
packaged in a S614-Win-SDK.
Linux
Linux SDK package, s614-lnx-sdk, provides device drive, A/V capturing & streaming service library,
and A/V capturing & streaming (over-IP) demos, for Linux platform. Currently, kernel version 2.6.9
and above are supported.
To demonstrate the application, two server demos are enclosed in Linux SDK, s614-lnx-sdk:
12