Seiko V175 - Manual (Page 8)

15
English
English
14
SETTING THE DATE
l Before setting the date, be sure to set the main time.
Unlock.
t
Pull out to the first click.
t
Turn clockwise until the desired date
appears.
t
Push back into the normal position.
t
Screw all the way in until it is locked.
Date
1. It is necessary to adjust the date at the end of February and 30-day months.
2. Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not change properly.
CROWN
STOPWATCH
l The stopwatch can measure up to 60 minutes in 1/5-second increments.
When the measurement reaches 60 minutes, the stopwatch automatically
stops.
l Split time measurement is available.
I Before using the stopwatch, be sure to check that the crown is set at the normal
position and that the STOPWATCH hands are reset to the "0" position.
STOPWATCH minute hand
STOPWATCH 1/5-second hand
• If the STOPWATCH hands do not return to the “0” position when the stopwatch is reset
to “0,” follow the procedure in “SETTING THE TIME AND ADJUSTING THE STOPWATCH
HAND POSITION”.
• While the second hand is moving at 2-second intervals, the stopwatch cannot be activated.
This is not a malfunction. See "ENERGY DEPLETION FOREWARNING FUNCTION" and "HOW
TO CHARGE AND START THE WATCH".
A
B