Seiko 7D46 - Manual (Page 7)

English
English
6 7
BEFORE INITIAL USE
■ POWER SAVE FUNCTION
● This watch is powered by electrical energy generated and stored by the built-in
Automatic Generating System. The watch also features the “power save func-
tion,” which automatically stops the hands from moving when the watch is not
in use for a certain period of time to minimize the electrical energy consumption.
When the watch is in power save mode, the hands stop moving but the built-in IC
continues to calculate the time and calendar.
DISPLAY AND BUTTON OPERATION
24-hour indicator
Big calendar
Hour hand
Second hand
Month indicator
Minute hand
First click position: calendar adjustment
First click position: calendar adjustment
Second click position: time settings
Second click position: time settings
[CAL. 7D46]
[CAL. 7D48]
Clockwise (Upward)
Counterclockwise (Downward)
Clockwise (Upward)
Counterclockwise (Downward)
Big calendar
Hour hand
Year indicator
Second hand
Month indicator 24-hour indicator
Minute hand
Year indicator
❖ Orientation of the displays of year, month and 24-hour indicator may vary depending on the
model.
● When the watch is in power save mode, swinging the watch several times will
activate the “time relay function,” which automatically resets the watch hands
to the correct time that has been retained inside the watch.
✽ Do not pull the crown out to the second click position while the watch is in power save mode.
This will cancel the power save function causing the time data retained in the watch to be
erased.
✽ Do not leave the watch with its crown being at the second click position, as the watch
consumes greater energy than it uses while it is in power save mode.
● When the watch is left untouched for approximately 24 hours (approximately
one day), the power save function is automatically activated.
✽ While the second hand is moving at two-second intervals, the power save function
cannot be activated.