Diamond Audio Technology D3 600.1 User Manual
Page 3
3
Frequency Response:
20Hz to 20KHz +/-3 dB
Signal to Noise Ratio:
>
95dBA (20 to 20kHz)
Channel Separation
50dB
THD+N(Total Harmonic Distortion + Noise)
<
0.2% (Output-1W 4 Ohms)
RCA Input Sensitivity:
150mV to 4V
RCA Input Impedance:
>
20K Ohms
Min to Max Voltage requirements
10.2V to 15.5V DC
High/Low Pass Crossover:
12dB/Oct, 30-500Hz Variable
Crossover Configuration:
Switchable (OFF/HP/LP)
Bass EQ
0 to 12dB @ 50Hz (Variable)
D3 400.2
2-Channel Amplifier
400 Watts RMS Output Power
(All Channels Driven):
(Into 4 Ohms)
100w x 2
(Into 2 Ohms)
200w x 2
(Bridged into 4 Ohms)
400w x 1
Frequency Response:
20Hz to 20KHz +/-3 dB
Signal to Noise Ratio:
>
90dBA (20 to 20kHz)
Channel Separation
50dB
THD+N(Total Harmonic Distortion + Noise)
<
0.2% (Output-1W 4 Ohms)
RCA Input Sensitivity:
150mV to 4V
RCA Input Impedance:
>
20K Ohms
Min to Max Voltage requirements
10.2V to 15.5V DC
High/Low Pass Crossover:
12dB/Oct, 40-400 Variable
Crossover Configuration:
Switchable (OFF/HP/LP)
Bass EQ
0 or 12dB @ 50Hz (Selectable)
D3 500.4
4-Channel Amplifier
500 Watts RMS Output Power
(All Channels Driven):
(Into 4 Ohms)
75w x 4
(Into 2 Ohms)
125w x 4
(Bridged into 4 Ohms)
250w x 2
Frequency Response:
20Hz to 20KHz +/-3 dB
Signal to Noise Ratio:
>
90dBA (20 to 20kHz)
Channel Separation
50dB
THD+N(Total Harmonic Distortion + Noise)
<
0.2% (Output-1W 4 Ohms)
RCA Input Sensitivity:
150mV to 4V
RCA Input Impedance:
>
20K Ohms
Min to Max Voltage requirements
10.2V to 15.5V DC
Low Pass Crossover:
12dB/Oct, 30-250Hz Variable
Crossover Configuration:
Low Pass only
Bass EQ
0 to 12dB @ 50Hz (Variable)
D3 600.1
Mono Amplifier
600 Watts RMS Output Power
(Single Channel Driven):
(Into 4 Ohms)
250w x 1
(Into 2 Ohms)
400w x 1
(Bridged into 1 Ohms)
600w x 1
Frequency Response:
40Hz to 250Hz +/-3 dB
Signal to Noise Ratio:
>70dBA (40 to 250Hz)
THD+N(Total Harmonic Distortion + Noise)
<
0.2% (Output-1W 4 Ohms)
RCA Input Sensitivity:
150mV to 4V
RCA Input Impedance:
>20K Ohms
Min to Max Voltage requirements
11V to 15.5V DC
Low Pass Crossover:
12dB/Oct, 50-250Hz Variable
Crossover Configuration:
Low Pass
Bass EQ
0 to 12dB @ 50Hz (Variable)
D3 1000.1
Mono Amplifier
1000 Watts RMS Output Power
(Single Channel Driven):
(Into 4 Ohms)
400w x 1
(Into 2 Ohms)
600w x 1
(Bridged into 1 Ohms)
1000w x 1