D-Link DPG-1200 - Manual (Page 24)

D-Link DPG-100 User Manual
Section - Configuration
Using The Software
At start-up, the application automatically scans for
PC-on-TV devices. The following image is the Connection
Status window.
Double-click the PC-on-TV Icon
If only one PC-on-TV device is located, it automatically connects to that PC-on-TV
device.
Once there is a connection, the device name will appear in the Connection Status
panel. If a PC-on-TV device is not located, the Display List will be empty. Click the
Refresh button to search for the device again.
If the device is still not listed, your PC-on-TV may not be properly connected. Run
the wizard again or check the Troubleshooting section of this manual to remedy
the problem.
To start PC-on-TV, click the PC-on-TV icon on the Windows ® desktop. You can also start the software via the Windows
Start -> All Programs -> PC-on-TV.
Starting the Software