Drive belts - check condition and tension, Drive belts — check condition and tension – Dodge 2008 Viper User Manual
Page 203
quality filters should be used to assure most efficient
service. Mopar
Engine Oil Filters are a high quality oil
filter and are recommended.
Drive Belts — Check Condition and Tension
Belt tension is controlled by means of an automatic
tensioner. Therefore, no belt tension adjustments are
required. However, belt and belt tensioner condition
should be inspected at the specified intervals and re-
placed if required. Improper belt tension can cause belt
slippage and failure. Low generator belt tension can
cause battery failure.
At the intervals indicated on the “Maintenance Sched-
ules,” inspect belt and belt tensioner condition. Inspect
belts for evidence of cuts, cracks, glazing, or frayed cords
and replaced if there is indication of damage, which could
result in belt failure. Also, check belt routing to make sure
there is no interference between the belts and other engine
components. See your authorized dealer for service.
8.4L ACCESSORY BELT ROUTING
1 — Alternator
2 — Tensioner
3 — Water Pump
4 — Power Steering Pump
5 — A/C Compressor
6— Routing for Non-A/C Applications
202
MAINTAINING YOUR VEHICLE