Iv. installation, Iii. specifications – San Jose Technology MA-19 User Manual
Page 3
IV. INSTALLATION
1. Secure your MA-19/MA-25/MA-66/MA-67 antenna to the top of
your vehicle and carry its cable into the vehicle.
2. Link the cable connector to your GPS receiver.
3. Start with your navigation.
5
III. SPECIFICATIONS
PHYSICAL
Construction:
Polycarbonate-radome at top, die-cast
shell at bottom/ rubber gasket for water
seal in between
Dimension:
58mm (L) x 48mm (W) x 15mm (H)
Weight:
65 grams (excluding cable & connector)
Color
of
Radome:
Standard in dark gray, other colors
available upon request
Standard Mounting:
Magnet mount with two magnets
Optional Mounting 1:
Screw mount with two M3 tapped holes
on the plastic flange of
MA-19/MA-25/MA-66/MA-67
Optional Mounting 2:
Customized metal sheet
ANTENNA ELEMENT
Center Frequency:
1575.42 MHz +/- 1.023 MHz
Polarization:
R.H.C.P. (Right Hand Circular
Polarization)
Absolute Gain at Zenith:
+5 dBi typically
Gain at 10
o
Elevation:
-1 dBi typically
Axial Ratio:
3 dB max.
Output VSWR:
1.8 Max.
Output Impedance:
50 ohm
2
San Jose Technology,Inc.
San Jose Technology,Inc.