beautypg.com

Digimerge D4202 User Manual

Page 26

background image

3. When you see the control bar, you have successfully logged into the program on the

Video Web Server. Click on “System Config” to set up.

SYSTEM CONFIG

5. Click on “System Config” again. In the Network setting, set the gateway the same as the

router’s gateway(192.168.1.1). Press “APPLY” to enable the change after the setting.

4. In the Peripheral setting, set baud rate, ID and the model that want to remotely control

later. Press “APPLY” to enable the change after the setting.

-23-