Dixon RAM XS5025BF / 968999725 - Manual (Page 41)

English - 41
MAINTENANCE
Parking Brake
Visually check that no damage is found on the lever,
cables, or switch belonging to the parking brake.
Perform a standstill test and check that there is
suffi cient braking action.
To adjust the parking brake, contact the Dixon service
workshop.
WARNING!
Faulty adjustment will result in
reduced braking ability and can
cause an accident.
V-belts
Check every 100 hours of operation. Check for severe
cracking and large nicks.
NOTE: The belt will show some small cracks in normal
operation.
The belts are not adjustable. Replace belts if they
begin to slip from wear.
IMPORTANT INFORMATION
The machine must be absolutely standing
still when applying the parking brake.
8011-564
Tire pressures
8061-019
Parking brake
Tire Pressures
Rear tires should have a pressure of 10 psi / 69 kPa
/.7 bar. Front tires should be at 15 psi / 103 kPa / 1 bar.