Controls, Seat – Dixon 13092-0901 User Manual
Page 16
16
SEAT:
Fore & Aft: Move lever, slide seat fore & aft to desired
position, release.
Seat Damper: A shock is located on the left side of
the seat frame. Remove clip on the top and pull plunger
up. Rotate shaft clockwise to make ride stiffer and
counter- clockwise for a softer ride. Reattach to seat
frame with clip.
Attention: Do not completely close off the damper.
Closing off the damper causes it to become stiff making
it difficult to fully extend the damper in order to open the
adjustment. THE PRODUCT IS NOT DAMAGED. To
restore adjustment follow these instructions: Hang the
damper in the vertical position with the rod pointing
down. Attach a load of approximately 15 pounds to the
rod end of the damper. The load will slowly extend the
damper. When fully extended the adjustment pin will be
engaged. Turn rod with the weight still hanging to open
the adjustment.
CONTROLS