Dodge 2004 Sprinter Carb & Chassis - Manual (Page 235)

MAINTAINING YOUR VEHICLE 235
7
Low Beam Headlamps
1. Unplug the cable connector from the bulb.
2. Unclip in the retaining springs. Press the retaining
springs towards the headlamps and down
(direction of arrow).
3. Remove the bulb.
4. Insert the new bulb so that the retaining lugs are
fed into the recesses in the reflector section of the
bulb holder.
5. Clip in the retaining springs.
6. Press on the cable connector.
7. Secure the housing cap.
Freightliner-all.book Page 235 Monday, December 1, 2003 2:54 PM