beautypg.com

Warning, Troubleshooting, Service – Royal Vacuums CH53010 User Manual

Page 13: Problem possible cause possible solution

background image

13

PRoBleM

PossiBle Cause

PossiBle solution

Vacuum won’t

run

1. Power cord not firmly plugged into outlet. 1. Plug unit in firmly.
2. Blown fuse or tripped breaker.

2. Check fuse or breaker in home. Replace

fuse/reset breaker in home.

3. Thermal Protector activated.

3. Unplug and allow vacuum to cool for 30min.

(This willl reset the thermal protector)

System Check

Indicator has

turned red

or

Vacuum won’t

pick up

or

Low suction

1.Rinsable Filter and/ or Filter

made with HEPA media is dirty.

1. Clean Rinsable Filter and or Filter made

with HEPA media - Pg. 9 and 10.

2. Dirt cup full and/ or clogged.

2. Empty dirt cup - Pg. 9.

3. Broken or worn belt.

3. Replace belt - Pg.12.

4. Brushroll and/ or Hose clogged.

4. Check Hose - Pg. 11. Check Brushroll - Pg.11.

5. Carpet height setting is incorrect.

5. Set Carpet Height Adjustment to appropri-

ate setting for carpet being cleaned - Pg.7.

Dust escaping

from vacuum

1. Dirt cup full.

1. Empty dirt cup - Pg. 9.

2. Dirt cup not installed correctly.

2. Review Dirt Cup removal & replacement

- Pg. 9.

3. Hose not installed correctly.

3. Review Hose installation - Pg. 7.

4. Rinsable and/ or Filter made with

HEPA media not installed completely.

4. Review Filter Removal and Cleaning - Pg.

9 and 10.

Vacuum is

difficult to push

or won’t move

forward

1. Carpet height setting is

incorrect.

1. Set Carpet Height Adjustment knob to

appropriate setting for carpet being cleaned

- Pg. 7.

Smoky/burning

smell detected

1. Belt broken or stretched.

1. Replace brushroll belt - Pg. 13.

2. Brushroll is clogged.

2. Clear/ remove debris from brushroll - Pg. 11.

5. tRouBlesHootinG

If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the

checklist below.
Any other servicing should be done by an authorized service representative.
If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take

it to a service center prior to continuing use.

WARNING

!

!

To reduce risk of personal injury - Unplug vacuum before servicing.

To obtain approved Hoover

®

service and genuine Hoover

®

parts, locate the nearest Authorized Hoover

®

Warranty Service Dealer (Depot) by:

• Checking the Yellow Pages under “Vacuum Cleaners” or “Household”.

• Visit our website at hoover.com (U.S. Customers) or hoover.ca (Canadian customers).

Follow the service center link to find the service outlet nearest you.

• For an automated referral of authorized service outlet locations call 1-800-944-9200.

Do not send your vacuum to Hoover

®

, Inc., Company in Glenwillow for service. This will only result in delay.

If you need further assistance:

To speak with a customer service representative call 1-800-944-9200; Mon-Fri 8am-7pm EST. Always

identify your vacuum by the complete model number when requesting information or ordering parts. (The

model number appears on the bottom of the vacuum.)

6. seRViCe