Specifications, Model ztr 4423 – Dixon 13632-0702 User Manual
Page 13
13
SPECIFICATIONS
Model ZTR 4423
CHASSIS:
Twin 12 gauge side frames and 7 gauge transmission
and engine base plate.
BODY:
All body parts made of high density polyethylene. Dent
and corrosion resistant.
MOWER DECK:
13 GA stamped steel construction. Three blades
combine for a 42 cut width. Cut height approximately
1-1/2- 4 via 7-position lift handle.
BLADE DRIVE:
Electric clutch.
TRANSMISSION:
Each rear wheel is independently driven by chain and
sprockets through a mechanical friction drive.
ENGINE:
15.5 HP Briggs & Stratton Intek, 4-Cycle, Single Cylinder,
Overhead Valve, Air-Cooled, Gasoline, Cast Iron Sleeve
and Pressure Lube with Spin -On Filter and AVS (Anti-
vibration System.
STARTING SYSTEM:
Electric by key switch operation with safety interlock blade
drive.
TIRES:
Front
11 x 4.00-5 ribbed tread.
Rear
18 x 8.50-8 Pro Tech
RECOMMENDED
Front
16-21 PSI
TIRE PRESSURE:
Rear
8-14 PSI
CAPACITIES:
Fuel
2.4 gallons total
Engine 1.5 quarts oil
DIMENSIONS:
Width 47 outside rear wheel measurement
Height 42 to top edge of seat
Length 72 hitch tab to front bumper
Weight 520 lbs.
Additional information provided in service instructions under the individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE