REMKO ATR-1 - Manual (Page 2)

2
Description of Device
The REMKO temperature control is an external, wall-mounted automatic
day and night temperature control with separate preset options for the
desired temperature.
Day and night temperatures can be set separately via the respective
thermostats. The integrated weekly clock timer (TIMER with power re-
serve) lets heating operation be pre-programmed for the week.
There are two models of the wall-mounted REMKO temperature control
available:
1. Control without external cabling ATR-1
The electrical connection and the connection to the warm air heater
have to be installed by authorised electrical personnel on the cus-
tomer-side in accordance with the wiring diagram (page 7).
2. Ready for plug in control ATR-2
The electrical connection is performed via an attached power cord
230 V and a 10 m long control cable with thermostat plug for con
nection to the REMKO warm air heater with thermostat socket.
G
The REMKO temperature control may only be attached to the ther-
mostat connection of the warm air heater intended for this purpose.
Day thermostat
Timer
Temperature sensor
Power control light
Mode selector
Night thermostat