REMKO GTF-5 - Manual (Page 5)

5
Turn the minutes pointer in the di-
rection of the arrow until the current
time appears next to the selection
arrow.
E.g. Fr 9:00 o‘clock.
Setting and programming example:
Segment pressed out
ð
Day temperature
Segment pressed in
ð
Night temperature
The activation times are set via the green switch segments.
7 x 12 = 84 segment .
1 switch segment = 2 hours
The corresponding switch segments are pressed out using for example,
a screwdriver.
Each day of the week is set individually.
Setting the Timer
The timer function can only be set if the switch segment has been
pressed out!
DAY mode
Room temp. 20 °C
(Day thermostat)
TIMER mode
Room temp. 20 °C
(Day thermostat)
Room temp. 10 °C
(Night thermostat)
ON OFF