Q3 Innovations UV HAWK - Manual (Page 6)

Adjusting the SPF (Sun Protection Factor)
Purpose: By adjusting the SPF setting, you can determine your maximum
exposure when factoring in the strength of your sun block lotion. To use
this feature, follow these instructions:
1. Press the SPF/Skin button once to put the unit into SPF Adjustment
Mode. Note: the SPF letters will flash when the unit is in SPF
Adjustment Mode.
2. Press the Meas./Adj. button to adjust the SPF setting from 0-100 to
match the SPF # on your sun block lotion.
3. Press the SPF/Skin button twice to exit SPF Adjustment Mode. Note:
The readings of this device will only correspond to the areas with SPF
lotion properly applied.
Adjusting the Skin Tone Setting
Purpose: By adjusting the Skin Tone Setting, you can factor in your
approximate skin tone level to get a more accurate estimate of your
sunburn exposure limits. To use this feature, follow these instructions:
1. Press the SPF/Skin button twice to put the unit into Skin Tone
Adjustment Mode. Note: the SKIN letters will flash when the unit is in
Skin Tone Adjustment Mode.
2. Press the Meas./Adj. button to adjust the skin tone from 1 to 4. (See
Skin Tone Setting Chart to estimate the correct skin tone setting).
3. Press the SPF/Skin button once to exit the Skin Tone Adjustment
Mode.
4 5