Dixon SPEEDZTR 44 - Manual (Page 17)

SPECIFICATIONS
17
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Additional information may be provided elsewhere in this manual.
SpeedZTR™ 38, 42 & 44
Chassis: 1-1/2 X 2 rectangle tube side frame
Mower Deck: 38”/42” - 13 ga stamped 2 blade deck.
44” - 11 ga fabricated construction with reinforced ribs.
Blade Drive: Electric clutch.
Transmission: Each rear wheel is independently driven by a Hydro
Gear EZT hydrostatic drive with cooling fan.
Engine:
SpeedZTR ™ 38: 15 HP Briggs & Stratton Intek, 4 cycle, single cylinder,
overhead valve, air cooled, gasoline, vertical shaft, cast
iron cylinder, full pressure lube with spin-on filter.
SpeedZTR ™ 42: 16 HP Briggs & Stratton Intek, 4 cycle, single cylinder,
overhead valve, air cooled, gasoline, vertical shaft, cast
iron cylinder, full pressure lube with spin-on filter.
SpeedZTR ™ 44: 20 HP Briggs & Stratton twin cylinder engine,
overhead valve, air cooled, gasoline, full pressure lube
with oil filter, vertical shaft, aluminum head and block
with cast-iron cylinder liners.
Starting Electric-key switch operation with safety interlock blade
System: drive.
Tires: 38/42” - Front 11 x 4.00-5 smooth tread (16-21 PSI)
38” - Rear 18x7.50-8--4 ply turf tread (8-14 PSI)
42” - Rear 18x8.50-8--4 ply turf tread (8-14 PSI)
44” - Rear 18x9.50-8--4 ply turf tread (8-14 PSI)
Capacities: Fuel 4.5 gallons
Engine Oil 1.3 quarts
Dimensions: Width 43” maximum track width
Height 43” to top edge of seat
Length 69” hitch tab to front bumper
Weight power unit - 482 lbs
with 38” deck - 530 lbs
with 42” deck - 537 lbs
with 44” deck - 570 lbs