Proel MI6 - Manual (Page 5)

5
MODELLO Mi6 Connettori
CANALI INGRESSO MONO
Sensibilità Ingresso Mic from -10 to -50 dBu
XLR-F Bilanciato
Impedenza Ingresso Mic 2 Kohm
Sensibilità Ingresso Line from +20 to -20 dBu
Jack Bilanciato
Impedenza Ingresso Line 10 Kohm
EQ ALTI (shelving) ±15 dB @ 12KHz
EQ BASSI (shelving) ±15 dB @ 80Hz
CANALI INGRESSO STEREO
Sensibilità Ingresso Line -10 dBu
Jack Bilanciato
Impedenza Ingresso Line 10 Kohm
SEZIONE MASTER
Livello nom. MAIN MIX +4 dBu Jack Bilanciato
Livello nom. 2 - TRK OUT 0 dBu Rca Sbilanciato
Livello nom. 2 - TRK IN 0 dBu Rca Sbilanciato
Impedenza min. PHONES 32 ohm
Jack Stereo
Livello max. PHONES (2x) 193 mW
SPECIFICHE GENERALI
Livello Massimo Uscite +22 dBu
Diafonia mis. a 1 KHz > 82 dBu
HUM & N non pesato < -93 dBu
THD+N a +4dB, 1kHz < 0,01 %
Dimensioni (L x A x P) 173 x 222 x 60 mm
Peso 1.00 kg
ALIMENTAZIONE
Alimentazione 18VAC 500mA usare solo AC/AC ADAPTER incluso
Tensione di Rete,
vedi l'etichetta sull' AC/
AC ADAPTER, disponibile
per:
110-120 VAC (±10%) 50 / 60 Hz (US plug)
230-240 VAC (±10%) 50 / 60 Hz (EU plug)
240 VAC (±10%) 50 / 60 Hz (UK plug)
Assorbimento 17 VA
MODEL Mi6 Connectors
MONO INPUT CHANNELS
Mic Input Sensitivity from -10 to -50 dBu
Balanced XLR-F
Mic Input Impedance 2 Kohm
Line Input Sensitivity from +20 to -20 dBu
Balanced Jack
Line Input Impedance 10 Kohm
EQ HIGH (shelving) ±15 dB @ 12KHz
EQ LOW (shelving) ±15 dB @ 80Hz
STEREO INPUT CHANNELS
Line Input Sensitivity -10 dBu
Balanced Jack
Line Input Impedance 10 Kohm
MASTER SECTION
MAIN MIX nom. out level +4 dBu Balanced Jack
2 - TRK nom. out level 0 dBu Unbalanced Rca
2 - TRK nom. in level 0 dBu Unbalanced Rca
PHONES min. impedance 32 ohm
Stereo Jack
PHONES max. out level (2x) 193 mW
GENERAL SPECIFICATIONS
Max level all outputs +22 dBu
Crosstalk meas. at 1 KHz > 82 dBu
HUM & N unweighted < -93 dBu
THD+N at +4dB, 1kHz < 0,01 %
Dimensions (W x H x D) 173 x 222 x 60 mm
Weight 1.00 kg
POWER REQUIREMENTS
Supply 18VAC 500mA use only supplied AC/AC ADAPTER
Mains Supply Voltage,
see label on the AC/AC
ADAPTER, available for:
110-120 VAC (±10%) 50 / 60 Hz (US plug)
230-240 VAC (±10%) 50 / 60 Hz (EU plug)
240 VAC (±10%) 50 / 60 Hz (UK plug)
Consumption 17 VA
TECHNICAL SPECIFICATIONS SPECIFICHE TECNICHE