Proel ACDT90 - Manual (Page 13)

CD player functions:
• OPEN/CLOSE. Press this key to open/close the CD tray.
• PLAY/PAUSE. Starts/stops track playback.
• LEVEL. This control serves to set CD player volume.
• STOP. Stops CD playback.
• B.SKIP/REV. Pressing this key once, playback starts from the
beginning of current track.
Pressing it twice, playback starts from the beginning of
previous track. Keeping this key pressed, the CD will be in
fast reverse play.
• F.SKIP/FF. Pressing this key once, playback starts from the
beginning of next track.
Keeping this key pressed, the CD will be in fast forward play.
• REPEAT. Pressing this key once, the current track is in
continuous playback. Pressing it twice, the whole CD is in
continuous playback. Pressing it three times the CD player
will resume to normal playback.
•
PROG . It’s possible to program the tracks you wish to play in
a sequence of your choice. Pressing this key the display
flashes, using the arrows keys you select the track you want
to insert into program, then confirm it using again the PROG
key. Repeat the same procedure to add other tracks to
program. Pressing PLAY the CD player will begin
programmed playback.
Note: It’s possible to insert in a program up to 20 tracks.
7. RADIO
• POWER. From OFF position moving the knob clockwise the tuner is
turned on.
• PROGRAM LISTENING. Radio station may be selected both
manually both automatically.
• AUTOMATIC STATION RESEARCH. This feature can be used with
strong and without interferences station signal.
a. Press BAND key to select desired band (AM or FM).
b. Press UP or DOWN key for about 2 seconds to start automatic
radio station search. This search stops at first station with a good
signal.