Posiflex SD-566W - Manual

Page 1 / 2
SD-560/566 SERIES
UPGRADE KIT
USER’S MANUAL
Rev. : B0
I. FEATURES
Upgrade kit for fan free touch terminals KS-7212 series
Magnetic Stripe Reader in USB full speed HID interface
Options for MSR heads covering ISO single head & dual head or JIS I/II
3 tracks type MSR can read also AAMVA and CA DMV card
Optional optical Finger Print Sensor in USB interface
Industry's most accurate fingerprint algorithm
Total power consumption: 300 mA @ 5V DC through proprietary USB port
FCC NOTICE
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause
interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC
Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct the interference.
WARRANTY LIMITS
Warranty will terminate automatically when the equipment is opened by any person other than the authorized technicians. The user should consult his/her
dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by no
means responsible for any damage or hazard caused by improper application.
The hardware utility program, including instructions for its use, is provided “AS IS” without warranty of any kind. Posiflex Technology, Inc. further disclaims
all implied warranties including without limitation any implied warranties of merchantability or of fitness for a particular purpose. the entire risk arising out of
the use or performance of the software and documentation remains with you.
ABOUT THIS MANUAL
This manual is written in an attempt with full strength to assist the user to utilize the upgrade kit SD-560/566 for the Posiflex fan free touch terminals KS-
7212 systems. This series of products incorporate 2 delicately designed POS peripherals each can be used as an excellent tool to accommodate the required
security specially involved in POS business, kiosk and hospitality operation. This manual covers the conceptual and operational aspects of these units. For
technical aspects involving opening of the unit or option implementation, it is only available to the authorized distributors.
The manufacturer of the SD-560/566 series heartily apologizes to the user for reserving the right to change or to modify this manual without notice due to the
rapid and constant progress and improvement on science and technology. The user may always obtain the most up to date information through any of our web
sites: http://www.posiflex.com or http://www.posiflex.com.tw.
 Copyright Posiflex Technology, Inc. 2013
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or by any means,
electronic, mechanical, photocopying, or otherwise, without the prior written consent of Posiflex Technology, Inc. the publisher of this documentation
TRADE MARKS AND SERVICE MARKS
POSIFLEX is a registered trademark of Posiflex Technology, Inc. an ISO-9001 and ISO-14001 certified
manufacturer. Other brand and product names are trademarks and registered trademarks and service marks of
their respective owners.
II. INSTALLATION
1. HARDWARE INSTALLATION
Please unfasten the 2 screws in the back of the right side on main
unit (Please refer to the left picture). Next, take away the cover
and pull the cable out. Gently connect this cable to the white
connector inside of SD-560/566 (Please refer to the right picture).
Carefully arrange the excessive length of this cable back in the
hole and screw-fit it back to the original position. Please reserve
this cover if it is possible to have the side mount kit removed.
2. DRIVER INSTALLATION
1. For MSR: Through the proprietary internal USB port, the MSR reader in SD-560/566
connects to the terminal and operational as a USB KB. This is the reason why no driver
installation is required. For application in several OS such as MS-DOS or Linux (Exclude
Windows), some technical modifications are required and it is advisable to specify such
conditions clearly while ordering the SD-560/566. For MS-DOS application, please enable
the USB keyboard and set USB operation mode to Full/Low Speed in system CMOS setup.
Refer to “Operation Guide” for manipulation over the reader configuration.
2.
For Finger Print Sensor: With the purpose of performing finger print registration or
verification (authentication) in an AP, it requires software programmer to obtain and utilize
its SDK (software developer’s kit). Posiflex delivers this optical finger print sensor with its
drivers. Please find in the mini CD delivered with SD-560/566 or Product Information CD
delivered with Posiflex POS system in the folder for “Posiflex Optical Finger Print Sensor”.
警告使用者 警告使用者 警告使用者 警告使用者
這是甲類的資訊產品，在居住的環
境 中使 用 時 ， 可 能會 造 成 射 頻干
擾，在這種情況下，使用者會被要
求採取某些適當的對策。
T31454
P/N: 19850902030